10.7. Domain Name Servers (DNS)

The Domain Name Service (DNS) is a fundamental component of the Internet: it maps host names to IP addresses (and vice-versa), which allows the use of www.debian.org instead of 130.89.148.77 or 2001:67c:2564:a119::77.

DNS records are organized in zones; each zone matches either a domain (or a subdomain) or an IP address range (since IP addresses are generally allocated in consecutive ranges). A primary server is authoritative on the contents of a zone; secondary servers, usually hosted on separate machines, provide regularly refreshed copies of the primary zone.

Each zone can contain records of various kinds (Resource Records), these are some of the most common:

A (address record): IPv4 address. This is the most common form to point a domain to an IPv4 address.
CNAME (canonical name record): alias
MX (mail exchange): an email server. This information is used by other email servers to find where to send email addressed to a given address. Each MX record has a priority. The highest-priority server (with the lowest number) is tried first (see sidebar 基本知识 SMTP); other servers are contacted in order of decreasing priority if the first one does not reply.
PTR (pointer): mapping of an IP address to a name. Such a record is stored in a “reverse DNS” zone named after the IP address range. For example, 1.168.192.in-addr.arpa is the zone containing the reverse mapping for all addresses in the 192.168.1.0/24 range.
AAAA (IPv6 address record): IPv6 address.
NS (name server): maps a name to a name server. Each domain must have at least one NS record. These records point at a DNS server that can answer queries concerning this domain; they usually point at the primary and secondary servers for the domain. These records also allow DNS delegation; for instance, the falcot.com zone can include an NS record for internal.falcot.com, which means that the internal.falcot.com zone is handled by another server. Of course, this server must declare an internal.falcot.com zone.

10.7.1. DNS software

The reference name server, Bind, was developed and is maintained by ISC (the Internet Software Consortium). It is provided in Debian by the bind9 package. Version 9 brings two major changes compared to previous versions. First, the DNS server can now run under an unprivileged user, so that a security vulnerability in the server does not grant root privileges to the attacker (as was seen repeatedly with versions 8.x).

Furthermore, Bind supports the DNSSEC standard for signing (and therefore authenticating) DNS records, which allows blocking any spoofing of this data during man-in-the-middle attacks.

10.7.2. Configuring bind

Configuration files for bind, irrespective of version, have the same structure.

The Falcot administrators created a primary falcot.com zone to store information related to this domain, and a 168.192.in-addr.arpa zone for reverse mapping of IP addresses in the local networks.

CAUTION Names of reverse zones

Reverse zones have a particular name. The zone covering the 192.168.0.0/16 network needs to be named 168.192.in-addr.arpa: the IP address components are reversed, and followed by the in-addr.arpa suffix.

For IPv6 networks, the suffix is ip6.arpa and the IP address components which are reversed are each character in the full hexadecimal representation of the IP address. As such, the 2001:0bc8:31a0::/48 network would use a zone named 0.a.1.3.8.c.b.0.1.0.0.2.ip6.arpa.

The following configuration excerpts, taken from the Falcot files, can serve as starting points to configure a DNS server:

例 10.12. Excerpt of /etc/bind/named.conf.local

zone "falcot.com" {
        type master;
        file "/etc/bind/db.falcot.com";
        allow-query { any; };
        allow-transfer {
                195.20.105.149/32 ; // ns0.xname.org
                193.23.158.13/32 ; // ns1.xname.org
        };
};

zone "internal.falcot.com" {
        type master;
        file "/etc/bind/db.internal.falcot.com";
        allow-query { 192.168.0.0/16; };
};

zone "168.192.in-addr.arpa" {
        type master;
        file "/etc/bind/db.192.168";
        allow-query { 192.168.0.0/16; };
};

例 10.13. Excerpt of /etc/bind/db.falcot.com

; falcot.com Zone 
; admin.falcot.com. => zone contact: admin@falcot.com
$TTL    604800
@       IN      SOA     falcot.com. admin.falcot.com. (
                        20040121        ; Serial
                         604800         ; Refresh
                          86400         ; Retry
                        2419200         ; Expire
                         604800 )       ; Negative Cache TTL
;
; The @ refers to the zone name ("falcot.com" here)
; or to $ORIGIN if that directive has been used
;
@       IN      NS      ns
@       IN      NS      ns0.xname.org.

internal IN      NS      192.168.0.2

@       IN      A       212.94.201.10
@       IN      MX      5 mail
@       IN      MX      10 mail2

ns      IN      A       212.94.201.10
mail    IN      A       212.94.201.10
mail2   IN      A       212.94.201.11
www     IN      A       212.94.201.11

dns     IN      CNAME   ns

例 10.14. Excerpt of /etc/bind/db.192.168

; Reverse zone for 192.168.0.0/16
; admin.falcot.com. => zone contact: admin@falcot.com
$TTL    604800
@       IN      SOA     ns.internal.falcot.com. admin.falcot.com. (
                        20040121        ; Serial
                         604800         ; Refresh
                          86400         ; Retry
                        2419200         ; Expire
                         604800 )       ; Negative Cache TTL

        IN      NS      ns.internal.falcot.com.

; 192.168.0.1 -> arrakis
1.0     IN      PTR     arrakis.internal.falcot.com.
; 192.168.0.2 -> neptune
2.0     IN      PTR     neptune.internal.falcot.com.

; 192.168.3.1 -> pau
1.3     IN      PTR     pau.internal.falcot.com.